01 · Detectra · Detect
The inspection
crawler.
Detectra is a remotely operated crawler that enters the blade at the root and drives up to 80 % of the blade length. It records the inside in 8K 360° video at 24 fps under its own light. Capture takes about 15 minutes per blade. Compatible with all major turbine manufacturers. CE-marked, with a 12-month warranty.
3.7 kg
L×W×H: 350 × 250 × 200 mm
~15 min
Capture per blade
~3 h
Review per turbine
The eye
One pass records the whole inside.
The head is an Insta360 X5 recording 8K — 7680 × 3840 — at 24 fps, stitched on board and written to 250 GB of local storage. It captures the full sphere, so nothing has to be aimed at while the crawler is in the blade. The looking happens afterwards, from any angle, at your desk.
Specifications
- Dimensions (L x W x H)
- 350 × 250 × 200 mm
- Weight
- 3.7 kg
- Speed
- 0 to 3 m/s, four-wheel electric drive
- Blade reach
- Up to 80 % of blade length from the root
- 360° camera
- Insta360 X5, 8K (7680 × 3840) at 24 fps, stitched on board
- Navigation camera
- Forward-facing, 120° wide angle
- Lighting
- 4 × 52 LED panels, each switched individually
- Storage
- 250 GB on board
- Link to tablet
- Wi-Fi 2.4 GHz, 80 m rated, 100 m verified line of sight
- Endurance
- Up to 12 blade inspections per day
- Power
- Makita 18 V, 2 main packs plus 3 drive packs, chargers included
- Tablet
- Rugged 10.1", IP68, 500 nit
- Languages
- English, French, German, Spanish
- Retrieval
- Cable pull-out system
- Compliance
- CE-marked, 12-month warranty
Detectra V3 datasheet, Rev. A.
In the case
Everything needed on site.
- Detectra crawler
- Remote-control tablet
- Pull-out cable
- Batteries and chargers
- Two heavy-duty transport cases, one for the crawler and one for accessories
- Remote support over built-in VPN
- Software updates and 12-month warranty
Deliverables
What comes out of the blade.
- One 8K 360° master recording per take
- Distance-tagged telemetry overlay for every recording
- Metadata: site, turbine, blade, chamber, operator, time
- Review, flagging and reporting in Fenestra
- About 3 hours of review per turbine today
Questions
Frequently asked about Detectra.
- How far into the blade does Detectra go?
- Up to 80 % of the blade length from the root, on four-wheel electric drive at 0 to 3 m/s. It drives back to the root, or is pulled back on the cable.
- How long does an internal blade inspection take with Detectra?
- About 15 minutes of capture per blade, with the turbine stopped and the blade locked. Up to 12 blade inspections a day on one set of batteries. Review of the recordings takes about 3 hours per turbine today.
- What does Detectra record?
- 8K 360° video (7680 × 3840) at 24 fps under its own light, stitched on board, with the distance from the root on every take. The full sphere is captured, so nothing has to be aimed at while the crawler is in the blade.
- Does anyone have to enter the blade?
- No. The operator stays at the root with a rugged tablet that joins the crawler’s own wireless link, 80 m rated and 100 m verified line of sight. No internet is needed inside the blade.
- Which turbines is Detectra compatible with?
- All major turbine manufacturers. Detectra enters through the root hatch as a technician would. It is CE-marked and comes with a 12-month warranty, software updates and remote support over a built-in VPN.
Want to see a real inspection?
We can walk you through a recorded blade inspection: the 360° viewer, the findings, the report. Around 20 minutes.